74g, 3500 Lumens, 640,000cd: The Terminator M1 is Acebeam's first product that combines the latest LEP with LED technologies. Its LEP module produces a zoomable spotlight beam up to 1600 metres! Easily switch between Spotlight or Floodlight with a button. A high capacity 5000mAh rechargeable USB-C 21700 Li-ion battery is included. The ultimate floodlight, spotlight, signal light or any light. We stock the desert sand colour only.

Features:

• Dual Light Source: 1 x LEP + 3 x 6500K Cool White LEDs
• Internal zoom design of LEP source: Rotate the LEP head to adjust the focus without changing size.
• Beam Angle: 3~16°
• Max Output: 3500 lumens (LED); 700 lumens (LEP)
• Max Throw: LEP: 1600 meters (640,000cd); LED: 231 meters (13,340cd)
• Impact Resistance: 1 meter
• Waterproof: IP68, underwater 2 meters
• Battery: 1x ACEBEAM USB-C Rechargeable 21700 Li-ion Battery (included)
• Power Switch: ON/OFF and output modes cycle
• Function Switch: LEP/LED switching

Dimensions:

• L: 104mm
• W: 35.2mm
• H: 63.4mm
• Weight: 232.2g (Excluding Battery); 304.6g (Including Battery)

Operation:

Power Switch Operation

• ON: Click the Power Switch.
• OFF: Click the Power Switch when ON.
• Output Selection: When the LED light source is ON, press and hold the Power Switch, and the LED light source will cycle from Low-Med1-Med2-High. Release the Power Switch to select the output and it will be memorised;
• Turbo: In the Unlocked state and under the LED light source option, double-click the Power Switch quickly to enter the Turbo output, and double-click again to switch between Turbo and memory output;
• Strobe: In the Unlocked state and under the LED light source option, quickly press the Power Switch three times to enter the Strobe output;
• Ultra-low: When the flashlight is OFF and under the LED light source option, press and hold the Power Switch to enter the Ultra-low output;
• Ultra-low, Strobe, and Turbo modes will not be memorised.
• Lock: When the light is OFF, press and hold the Power Switch for 3 seconds, the current light source will flash 3 times, and the flashlight will be Locked. At this time, any switch operation will be invalid.
• Unlock: When the light is Locked, press and hold the Power Switch for 3 seconds, the current light source will flash 3 times, and then Unlock the light. If the current light source option is LED, the LED will be Ultra-low ON when unlocked, and if the current light source option is LEP, the light will be LEP ON when unlocked.

Function Switch Operation

When the light is ON, click the Function Switch, the light output will switch between LEP light source or LED light source options.
 
LEP Zoom Operation

When the LEP light source is ON, rotate the LEP head left or right, and the LEP beam angle will increase or decrease uniformly between 16° and 3°.