The Klarus WL6 is an ultra-lightweight strobe light featuring 360ยฐ omnidirectional signaling with zero blind spots and a constant white light mode for close-range emergency tasks. Intuitive one-button tap controls allow seamless operation in total darkness, while the 360ยฐ rotatable clip ensures flexible attachment to gear or clothing for maximum comfort.
Package Includes
- 1 x Klarus WL6
- 1 x USB Charging Cable (USB-A to USB-C)
- 1 x User Manual
Key Information
| Feature |
Details |
| Primary Light Source |
1 x Omni-Directional Red and Blue Light Source |
| Auxiliary Light Source |
1 x White Light Source |
| Power Source |
1 x Built-in 550mAh Rechargeable Lithium-ion Battery |
| Recharging Method |
USB Type-C |
| Material |
Plastic |
| Warranty (Torch) |
1 year |
| Warranty (Accessories) |
1 year |
ANSI/PLATO FL1 Specifications
| Feature |
Measurement |
| Maximum Light Output |
6.5 lumens |
| Maximum Runtime |
24 hours |
| Maximum Beam Distance |
No data |
| Peak Beam Intensity |
No data |
| Impact Resistance |
2 metres |
| Ingress Protection Rating |
IP65 |
Dimensions
| Feature |
Measurement |
| Length |
72 mm |
| Width |
42 mm |
| Height |
34 mm |
| Weight |
60 g |
Additional Data
Manufacturer's Data
| Categories |
Red/Blue Flash (Top Only) |
Red/Blue Flash (Edge Only) |
Red/Blue Flash (Left) |
Red/Blue Flash (Right) |
Red/Blue Flash (Rotating) |
Red/Blue Flash (Full Coverage) |
Constant White |
| Output (Lumen) |
โ |
โ |
โ |
โ |
โ |
โ |
6.5 lm |
| Max Runtime |
20h |
20h |
20h |
20h |
10h |
10h |
24h |
| Impact Resistance |
2 m |
| Ingress Protection |
IP65 |
Note: The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using one 550mAh lithium batteries of KLARUS, different batteries or usage environment may affect the above data.
Performance and Runtime Disclaimer
How to read the data: The outputs provided above are maximum outputs for each mode, and the runtimes provided are the time it takes to drop to 10% of the initial output. This is in line with the International Flashlight Testing Standard ANSI FL1.
Any visual representations (graphs) of the data are approximate only.
Read more
The actual output of the torch/headlamp is controlled by an in-built temperature regulation system. As the torch/headlamp heats up, the brightness will drop to prevent overheating. The Turbo modes of torches/headlamps usually drop down significantly after anything from 15 seconds to 2 minutes. High modes often also experience a drop down over time. Medium and Low modes, however, can be constant for very close to the length of time specified. As the torch/headlamp cools down, either from being turned off or from being used on a lower output level, you will be able to access higher brightness levels again.
Example: An output of 2000 lumens and runtime of 5 hours does not mean 2000 lumens for 5 hours โ it means it starts at 2000 lumens and drops below 200 lumens after 5 hours of continuous use.
Turbo and high modes may be unavailable or limited as the battery gets low on charge.
Exact specifications can vary between torches, batteries, age and environments.
