The Imalent LD70 is a compact EDC torch built around a single CREE XHP70.2 LED, reaching a maximum output of 4000 lumens and a beam distance of 203 metres at a peak intensity of 10350 candela. Five brightness levels plus a dedicated strobe mode cover everything from a 4000 lumen Turbo down to a 20 lumen Low, powered by a built-in 1100mAh 18350 Li-ion battery which provides up to 15 hours of runtime. A small OLED screen on the body shows brightness level, battery voltage and lock status at a glance. Smart protections include reverse polarity protection, a low-voltage warning and a lockout mode to prevent accidental activation in a pocket or pack, while the torch carries an IPX8 rating with 1.5 metre impact resistance.
Note: This Premium Edition package is made up of the LD70 and the LD00 charging case.
Features
- Five Brightness Levels Plus Strobe: Runs from a 4000 lumen Turbo down to a 20 lumen Low, with a dedicated strobe mode for emergencies.
- OLED Status Display: A built-in OLED screen shows brightness level, battery voltage and lock status at a glance.
- IPX8 Rated Protection: Submersible to 2 metres, with 1.5 metre impact resistance for reliable everyday carry.
Package Includes
- 1 x Imalent LD70
- 1 x Imalent LD00 Charging Case
- 1 x USB Charging Cable (USB-C to USB-C)
- 1 x Lanyard
- 1 x User Manual
Key Information
| Feature |
Details |
| Primary Light Source |
1 x CREE XHP70.2 LED |
| Power Source |
1 x Built-in 1100mAh Rechargeable 18350 Li-ion Battery |
| Recharging Methods |
USB-C via charging case or
Magnetic |
| Material |
Aluminium alloy |
| Warranty (Torch) |
2 years |
| Warranty (Accessories) |
1 year |
ANSI/PLATO FL1 Specifications
| Feature |
Measurement |
| Maximum Light Output |
4000 lumens |
| Maximum Runtime |
15 hours |
| Maximum Beam Distance |
203 metres |
| Peak Beam Intensity |
10350 candela |
| Impact Resistance |
1.5 metres |
| Ingress Protection Rating |
IPX8 |
Dimensions
| Feature |
Measurement |
| Length |
81 mm |
| Head Diameter |
25 mm |
| Body Diameter |
25 mm |
| Weight |
88 g |
Additional Data
| ANSI/NEMA FL1 |
Turbo |
High |
Middle |
Middle Low |
Low |
| Max Output |
4000~900 lm |
2000~900 lm |
900 lm |
200 lm |
20 lm |
| Max Runtime |
1min + 38min |
1.5min + 39min |
45min |
3h 50min |
15h |
| Max Beam Distance |
203 m |
โ |
โ |
โ |
โ |
| Peak Beam Intensity |
10350 cd |
โ |
โ |
โ |
โ |
Performance and Runtime Disclaimer
How to read the data: The outputs provided above are maximum outputs for each mode, and the runtimes provided are the time it takes to drop to 10% of the initial output. This is in line with the International Flashlight Testing Standard ANSI FL1.
Any visual representations (graphs) of the data are approximate only.
Read more
The actual output of the torch/headlamp is controlled by an in-built temperature regulation system. As the torch/headlamp heats up, the brightness will drop to prevent overheating. The Turbo modes of torches/headlamps usually drop down significantly after anything from 15 seconds to 2 minutes. High modes often also experience a drop down over time. Medium and Low modes, however, can be constant for very close to the length of time specified. As the torch/headlamp cools down, either from being turned off or from being used on a lower output level, you will be able to access higher brightness levels again.
Example: An output of 2000 lumens and runtime of 5 hours does not mean 2000 lumens for 5 hours โ it means it starts at 2000 lumens and drops below 200 lumens after 5 hours of continuous use.
Turbo and high modes may be unavailable or limited as the battery gets low on charge.
Exact specifications can vary between torches, batteries, age and environments.
