Description
The Olight ArkTac Ultra is a flat torch with five light sources: a spotlight, a floodlight, a red light, a UV light and a Class 1 green laser. The spotlight reaches 1800 lumens and 215 metres, the floodlight outputs up to 1300 lumens, and the laser can run alongside any of the other four. A light press on the tail switch turns on the floodlight and a firm press turns on the spotlight, while the CommandPoint button beside it gives Strobe by default or can be set to red, UV or the laser. The body is made from Olight's OAL 2 aluminium alloy, 17mm thick, rated IPX7 and drop tested to 1.5 metres. A built-in 2050mAh battery gives up to 20 days runtime on Moonlight mode, and it charges by USB-C or the included MCC4 magnetic cable.
LAUNCH PROMOTION: Get a FREE ArkTac Pouch (worth $24.95) when you order now!
Features
- Five Light Sources: Spotlight up to 1800 lumens and 215 metres, floodlight up to 1300 lumens, red light up to 55 lumens, 365 nm UV up to 1200 mW, and a 510 nm to 530 nm Class 1 green laser.
- Laser Combinations: The green laser has its own button and combines with the spotlight, floodlight, UV or red light.
- OAL 2 Body: Olight rates OAL 2 at 1.86 times the hardness of 6061 aluminium. The body is 17mm thick and weighs 140 grams.
- Status Indicators: Illuminated source indicators show which light is selected before it turns on, and a micro-perforated display shows brightness in white and battery level in green.
- ToF Protection: A sensor locks out activation when something is within 5cm of the lens, to prevent accidental activation and battery drain in a pocket or pack.
- Dual Charging: Charges by USB-C or the included MCC4 magnetic cable. A USB-C cable is not included.
Package Includes
- 1 x Olight ArkTac Ultra
- 1 x Magnetic Charging Cable (USB-C to MCC4)
- 1 x User Manual
Key Information
ANSI/PLATO FL1 Specifications
Dimensions
Additional Data
Performance and Runtime Disclaimer
How to read the data: The outputs provided above are maximum outputs for each mode, and the runtimes provided are the time it takes to drop to 10% of the initial output. This is in line with the International Flashlight Testing Standard ANSI FL1.
Any visual representations (graphs) of the data are approximate only.
Read more












