ThruNite T10T Titanium AA led torch
37.4g, 169 Lumens: This solid and powerful titanium alloy torch from ThruNite is one of our favourite single AA torches. Change between firefly, low and high modes with either the 'reverse clicky' metal tail switch or by twisting the head. Metal case and diffuser tip included.
Features and Specifications
- Cree XP-G2 LED with a lifespan of 20+ years of run time.
- Uses one 1.5V AA battery.
- Max output: 169lumens with XP-G2.
- Working voltage: 0.9V-3V
- 93.5mm (Length) x 19mm (Diameter).
- 37.4g weight (without battery).
- Reverse polarity protection design to protect from improper battery installation.
- Tail-switch and twisting head design.
- Titanium body.
- Toughened ultra-clear glass lens with anti-reflective coating.
- OP reflector gives perfect flood.
- Removable clip.
- Stand on tail to serve as a candle, with the wand covered on the head.
- Press down and release the tail-switch to turn the flashlight on/off .
- 1. Switch ON: Press the tail cap button down completely until a “click” sound is heard and torch turns on.
- 2.Switch OFF: Press the tail cap button down until a “click” sound is heard and the light is turned off. You can also loosen the head a bit to turn the light off from on.
- Method 1: Half press the tail switch when the light is on to circle through firefly, low and high.
- Method 2: When the light is on, loosen the head a bit until the light turns off and tighten it in 2 seconds to change modes.
- Method 3: Click the tail switch to change modes (Interval between clicks should be less than 2 seconds)
Memory function is activated 2 seconds after the torch is turned off. Turn on the light after 2 seconds and the mode will be the same as your last use.